Komori Lithrone 40

Press Roller information page

Roller Configuration Diagram

Specifications

Inkers	Key	Prod Code	Set Qty	Core Dia	Roller Dia	Rubber Length	Total Length
A - Form Roller	A	KO550	1	59	87.5	1035	1102
B- Form Roller	B	KO551	1	59	77.5	1035	1114
C - Form Roller	C	KO552	1	59	85	1035	1102
D - Form Roller	D	KO553	1	68.5	90	1035	1114
E - Ductor	E	KO554	1	47	64	1035	1122
F - Distributor	F	KO555	2	47	75	1035	1098
G - Distributor	G	KO572	2	47	70	1035	1126
H - Distributor	H	KO557	1	59	85	1035	1147
S - Distributor	S	KO559	1	74.5	97	1035	1147
T - Distributor	T	KO562	1	45	70	1035	1074
P - Rider	P	KO558	1	45	70	1035	1074
Komorimatic continuous dampening system
V - Water Form Long	V	KO571	1	76	101	1138	1168
V- Water Form Short	V	KO560	1	76	101	1138	1136
V - Water Form O/S	V	KO563	1	76	102	1138	1150
W - Water Meter	W	KO561	1	60	86	1112	1205
Speciality rollers
A - Form Hickey	A	KO550R	1	59	87.5	1035	1102
Optional rollers
B - Cocking Form Roller	B	KO141	1	59	77.5	1035	1102
D - Cocking Form Roller	D	KO143	1	68.5	90	1035	1102

Further Information

RP unit - RP rollers are RD9 NOT EPDM
(RP rollers are same as in stock except we do not carry the K-dist or the H-dist. H-core same as F-core)

Plate cocking presses use:
B-form - KO141 C-form - KO143

Newer presses using Delta water system use a different core:
K0571 with a longer OAL
(There are several options for water forms on old presses)

Site by Seventy9

Komori Lithrone 40

Roller Configuration Diagram

Specifications

Further Information

Other Rollers